Gas, electric, vented, and ventless dryer intelligence — 213 products from 48 brands with error codes, fire safety data, and energy comparisons.
Every dryers product includes access to structured knowledge. Here's a preview of what's available.
The heating element has broken or burned out. Dryer will tumble but not heat. Test element continuity with a multimeter (should read 10-50 ohms). Replacement is a moderate DIY job requiring rear panel removal.
Lint buildup detected in the exhaust duct. d80 = 80% restricted. Check and clean the entire vent run from the dryer to the exterior wall cap. Crushed or sagging flex duct is the most common cause. Fire risk increases significantly above d80.
Primary electronic control board has malfunctioned. Try power cycling for 60 seconds. If error persists, board replacement is needed. Common after power surges — use a surge protector.
Remove lint from the screen after every load. Monthly, wash the screen with soap and water to remove fabric softener residue that blocks airflow. Hold screen up to light — if light doesn't pass through, it needs washing.
Disconnect the vent hose and clean the entire run to the exterior cap using a vent brush kit. Check for crushed sections, excessive length (max 25 feet with deductions for bends), and bird/pest nests at the exterior cap.
Listen for squealing or thumping during operation. A worn belt shows cracks or fraying. Drum rollers develop flat spots. Replace as a set — if one roller is worn, the others are close behind.
Gas: lower per-load cost ($0.15-0.25 vs $0.30-0.40 electric), requires gas hookup and 120V outlet. Electric: standard 240V/30A circuit, higher per-load cost, simpler installation. Heat pump: 50% less energy than conventional electric, no external vent needed, longer cycle times (60-90 min vs 45 min), higher upfront cost ($800-1200 premium).
Average 12 years with proper maintenance. Gas dryers tend to last 1-2 years longer than electric. Heat pump dryers average 10-12 years. Primary failure points: heating element, drum belt, thermal fuse, and moisture sensors.
Every dryer is matched across retailers using UPC barcodes and model numbers. One product, all offers and prices in one record.
Retailer-specific noise stripped. Model suffixes, promo text, and inconsistent formatting normalized into a clean, consistent name.
Specs pulled from every retailer source and merged. One store has dimensions, another has energy ratings — you get the complete picture.
30 product groups — the same model in different finishes, sizes, or configurations linked together with shared base attributes.
48 brands with products in this category. 7 brands have customized knowledge data (brand-specific error codes, failure modes, and maintenance tips).
Use exhaust restriction error codes (d80/d90/d95) and maintenance_schedule data to alert property owners when lint buildup reaches dangerous levels — dryer fires cause $238M in property damage annually.
Use cost_of_ownership and specification data to compare gas vs. electric vs. heat pump dryers — factoring in local utility rates, usage frequency, and installation costs for total cost of ownership.
Match dryer dimensions, venting requirements, and electrical/gas specs to the available laundry space — accounting for vent run length, circuit capacity, and stacking compatibility.
Access 213 products, 9 knowledge types, and 48 brands via a single API.